How Do You Install A Stainless Steel Faucet? [Easy Steps & Tips]
Do you need to install a new stainless steel faucet in your kitchen? If so, then you’ll need to know how to properly install a faucet. Follow these easy steps and you will have your new stainless steel faucet up and running in no time.
A stainless steel faucet can give your kitchen a sleek and modern look. Installing a stainless steel faucet is not difficult, but there are a few things you need to know before you start. If you don’t know these things, you could end up with a leaky faucet, and that would be frustrating.
In this blog post, we will show you how to install a stainless steel faucet in your kitchen. We will also provide some tips on how to make the installation process easier.
So, if you are thinking of installing a stainless steel faucet in your kitchen, keep reading!
Table of Contents
Selecting The Right Tools For Installation
First thing in installation are the right tools that you will need. Here are the tools you will need for installation:
- Adjustable wrench
- Channel locks
- Pipe wrenches
- Rag
- Teflon tape
- Screwdriver
- Gloves, safety glasses and a mask.
Once you have all the tools needed for installation, it’s time to get started. You may find that you already have some of these tools in your toolbox. But if not, they can be easily purchased at a hardware store.
Installing Your Stainless Steel Faucet: Step-By-Step Guide
Now that you have all the tools needed for installation, it’s time to get started! Here are the steps to installing your stainless steel faucet:
Step: 1
Shut off the water supply to the faucet by turning off the valve under the sink.
Step: 2
Open the faucet and allow all of the water to drain out.
Step: 3
Remove the old escutcheon and handle by pulling them straight up and off the faucet. If they are difficult to remove, you may need to use a channel lock or pipe wrench.
Step: 4
Install the new escutcheon and handle by following the instructions that come with the faucet.
Step: 5
Install the nut that holds the faucet in place by using an adjustable wrench.
Step: 6
Lift the faucet into the hole and tighten the nut by using a channel lock or pipe wrench.
Step: 7
Connect the water lines to the faucet, making sure that no water is leaking out.
Step: 8
Turn on the water supply and test out your new stainless steel faucet.
Step: 9
If everything is working properly, then put back the rest of the supplies and appliances.
Problems While Installing Your Stainless Steel Faucet
If the water is leaking, don’t panic! Leaking is a common problem when installing faucets. To fix a leaky faucet, tighten the nut that holds the faucet in place by using a channel lock or pipe wrench.
If the nut is tight and the faucet is still leaking, then you may need to replace the washer. To do this, remove the screw that holds the faucet to the sink.
Pull the faucet out of the sink, remove the washer and replace it with a new one. Then, reassemble the faucet and you should have a leak-free faucet.
Recommend Our Choice To Install A Stainless Steel Faucet
#Kraus KPF-2820SFS Oletto Single Handle Pull-Down Kitchen Faucet
Product Information
| Manufacturer | Kraus |
|---|---|
| Item Weight | 6 pounds |
| Product Dimensions | 10.63 x 3.5 x 16.63 inches |
| Size | 16 5/8 Inch |
| Color | Spot Free Stainless Steel |
| Flow Rate | 1.8 Gallons Per Minute |
| Handle Material | Stainless Steel |
Our Review:
The Kraus KPF-2820SFS is a high-quality stainless steel faucet that is built to last. It features a spot-free finish and a 360-degree swivel for a full range of motion.
The high-arc spout also allows you to fill large pots with ease so you will have no problems with this faucet. Plus, the dual-function sprayhead makes it easy to switch between a stream and a jet spray.
The dual-function spray head provides two different types of sprays: a stream for rinsing off dishes and a powerful spray for cleaning the sink. It is also available in a variety of different finishes, so you can find the perfect faucet for your kitchen.
The material of this product is all-brass, which is 100% lead free. The brass features a lifespan lasting up to five million uses. This ensures that your kitchen faucet will last and that it will function well for years to come.
It also features a water flow rate of 1.8 GPM, which is above average for most kitchen faucets. This ensures that you will have a steady stream of water no matter what you are using it for.
So, this is our choice to connect your kitchen with a stainless steel faucet. If you are looking for a high-quality stainless steel faucet that is built to last, then it is a great option.
Pros:
- Durable, lead free construction
- Swivels 360 degrees for a full range of motion
- High arc spout allows you to fill pots with ease
- Dual function spray head with two different types of sprays
- Water flow rate of 1.8 GPM
- Available in many different finishes
Cons:
- The handle may feel loose when you first turn the water on
Conclusion
In conclusion, a stainless steel faucet is a great option for every house because it is resilient and easy to clean. But the only problem is the installation process which can be a little bit hard.
This article helped you solve your installation problem and let you know about how to install a stainless steel faucet. If you follow the instructions carefully, then you will have no problems installing your new stainless steel faucet.
We hope this article is helpful for you. Thanks!
