Where Should I Place Carbon Monoxide Detector? [Everything You Should Know]

Place Carbon Monoxide Detector

Carbon monoxide Detector is a colorless, odorless, tasteless gas that is highly poisonous. The center for disease control and prevention (CDC) recommends that every home should have at least one carbon monoxide detector placed on each level of the building, with additional detectors installed outside of sleeping areas.

Carbon monoxide is the leading cause of accidental poisoning deaths in America, with almost 500 victims dying each year from carbon monoxide poisoning in the United States.

Place Carbon Monoxide Detector

If you are concerned about carbon monoxide poisoning in your home, it is important to understand how to choose an appropriate location for your carbon monoxide detector.

Mentioned Below Are The Places Where To Put This Detector And How To Use It.

Placement of Carbon Monoxide Detector

Placement of Carbon Monoxide Detector

First Floor

If you have a carbon monoxide detector on the first floor, it will be able to sense any buildup of fumes from appliances or other sources in your home caused by a malfunctioning furnace, water heater, stove, fireplace, or any other source.

Basement

Another good place to install a carbon monoxide detector is in your basement. Where it can be used to monitor the furnace equipment and any other sources of carbon monoxide. Also, it will allow you to monitor for any buildup of gases that may have leaked from your home’s main furnace, whether or not it is located in the basement.

Kitchen

If you do not have a carbon monoxide detector on the first floor of your home, you can install one in your kitchen. Some detectors have a setting that is sensitive to the odor of carbon monoxide, which will allow you to get an early warning of any situation where carbon monoxide is present in your home.

A good place to mount the detector in your kitchen might be near the stove, allowing you to monitor for any fumes that may have leaked from your gas appliances.

Garage

Make sure to place a carbon monoxide detector in your garage, near your car. This will allow you to monitor for any leaks that may happen while you are running the engine in your car or other vehicles.

Bedrooms

A carbon monoxide detector should be placed in any room where you are sleeping, particularly in bedrooms. This will allow you to monitor for any buildup of carbon monoxide in your home after you have closed off the heating system for the night.

Nearby sources of carbon monoxide, such as gas-powered generators, may still be operating while the heating system is turned off. A carbon monoxide detector in one of your bedrooms will allow you to wake up if a leak were to occur, ensuring your safety before the gas reaches harmful levels.

Second Floor

Another good place to put a carbon monoxide detector is on the second floor. This will allow it to sense if any fumes have leaked from the source of the problem on the first floor.

It will also allow you to monitor any carbon monoxide that may have leaked into the rooms where you sleep.

How To Install A Carbon Monoxide Detector?

How To Install A Carbon Monoxide Detector

To install this detector, follow the step-by-step instructions mentioned below:

1: Remove the detector from the package and remove its plastic covering. This will allow you to take a look at your new carbon monoxide detector and begin to familiarize yourself with all of the parts that are included. 

2: Locate a good place for your carbon monoxide detector. It should be easily accessible, somewhere that no one will bump into it or accidentally block its sensors.

3: Use the included screws to mount your carbon monoxide detector on the wall. Make sure to use a stud finder to ensure that you are mounting it correctly and safely. 

4: Plug the detector into a nearby electrical outlet and turn on your furnace or other appliances to test it. 

5: Check to make sure that the red light is on and the alarm is working properly. If you have a model that gives off a sound, make sure you hear it as well.

6: When you have finished checking your carbon monoxide detector. It will be ready to monitor your home for any leaks of carbon monoxide.

Here Is A Nice Video Explaining About, How To Install A Carbon Monoxide Detector For Home Safety?

Conclusion

Carbon monoxide is toxic to people, so you must place carbon monoxide detectors in your home. You should also check your carbon monoxide detectors regularly to ensure that they are working properly.

You should also have a good understanding of the symptoms of carbon monoxide poisoning. If you experience headaches, nausea, or dizziness whilst in your home, or if you smell a musty odor or notice that there is a yellowish tint to your skin or eyes, you may have carbon monoxide poisoning. 

If this is the case, get everyone out of the house immediately and call emergency services.

 Install Carbon Monoxide Detector

We hope that we have helped you understand the necessity of having a carbon monoxide detector in your home and where to place it.

If you follow these simple steps and ensure that your carbon monoxide detectors are working properly. You can ensure that you and your family will be protected from this dangerous gas.